TOOLS EQUIPMENTS
  • Metal tool box, 8 1/2" x 10" x 21" long, equipped with lock
  • Green hard hat
  • Green pants (Dickey style) 2 pair recommended
  • Bastard file 12-14" and finish file
  • Combination square
  • Simple drawing compass
  • 2 rolls of Teflon tape
  • Ballpeen hammer
  • 25' steel tape
  • Torpedo level
  • 24" level (wood or aluminum)
  • Claw hammer (straight claw)
  • 3/4" cold chisel
  • 3/4" wood chisel
  • 12" channel lock pliers
  • 6" needle nose pliers
  • 7" diagonal pliers
  • Lineman's pliers
  • Set of nut drivers
  • 3/8" drive socket set
  • 8" adjustable type wrench (crescent type)
  • 12" adjustable type wrench
  • Open end or combination wrenches (1/4, 5/16, 3/8, 7/16,1/2, 9/16, 5/8)
  • 6" flat tipped screwdriver
  • 10" flat tipped screwdriver
  • #2 point Phillips screwdriver
  • 18" pipe wrench
  • 12" pipe wrench
  • 12" hacksaw frame (Lenox) and three blades
  • 6" center punch
  • High speed drill bits (1/8, 3/16, 1/4, 5/6, 3/8)
  • 2 extra 1/4" high speed drill bits
  • 3 wood blades for the Jigsaw
  • Spade bits (1/2, 3/4, 1, 1 1/4)
  • Set of Allen wrenches
  • Keyhole saw
  • Pencil reamer
  • Inspection mirror (sm. handheld)
  • Changeable blade utility knife
  • 1 can mapp gas
  • 1 pound wire solder - silver bearing
  • Flux brushes (3)
  • 1" fitting brush
  • 3/4" fitting brush
  • 1/2" fitting brush
  • 1 copper tubing cutter (to cut up to 1" copper)
  • 1 midget tubing cutter (to cut up to 3/4" copper preferred)
  • 1 vise grip 6" or larger
  • 1 framing square
  • Pocket calculator (including square root function)
  • 1 roll plumber's sand cloth
  • 1 3/8" electric drill or cordless
  • 1 50' 14/3 extension cord
  • Carpenter's pencil
  • Chalk box
  • 1 roll electrician's tape
  • 2 sticks welder's soapstone and holder
  • 2 aviator tin snips (1 red handle and 1 green handle)
  • Stubby flat tipped screwdriver
  • 1 5/16" magnetic hex driver for drill
  • 1 1/4" magnetic hex driver for drill
  • #2 Phillips bit
  • 1/4" x 2" magnetized bit holder
  • Gloves (1 pair of leather and 2 pair of Jersey 100% cotton)
  • Flashlight with batteries
  • 1 copper tubing flaring tool (1/4" to 5/8")
  • 1 copper tubing swaging kit (1/4" to 5/8") OR
  • 1 combination tubing flaring./swaging kit (1/4" - 5/8)"
  • (16) ½" 90° solder elbows
  • (8) ½" solder tees
  • (4) ½" female x ½" solder adapters
  • (4) ½" solder caps
  • (10 ft.) ½" type M copper pipe - can be purchased locally
  • (10) ¾" 90° solder elbows
  • (2) ¾" x ½" 90° solder elbows
  • (6) ¾"x ¾" x ¾" solder tees
  • (5 ft.) ¾" type M copper pipe